VIPowER VP-9258(T) user manual Power LED indicator, JP8 2-pin Jumper

The following identifies the jumper options for setting the operation of the cooling fan.

JP7	JP8	Temperature
(Clear)

11-2 :ON

2		(Default)
3	1	2
1-2 :ON	(Clear)
1
		50°C
2
3	1	2
2-3 :ON	(Clear)
1
		40°C
2
3	1	2
(Clear)	(Clear)
1
		60°C
2
	1	2
3

JP8 (2-pin) Jumper

When JP8 pins 1-2 are jumpered (ON), the fan will always run continuously to disperse the heat. (Default)

When the jumper is removed, opera- tion of the fan will always be controlled by the JP7 jumper setting.

JP7 (3-pin) Jumper

1)Set JP7 pins 1-2 to ON. Controls temperature at 50 °C

2)Set JP7 pins 2-3 to ON. Controls temperature at 40 °C

3)Clear JP7 setting (no jumper). Controls temperature at 60 °C

3. Power LED indicator

The power LED indicator is located on the front panel of the VP-9258(T). The power LED will be green light when connect with the power cable. When you write the data to the VP-9258(T), the power LED will be orange light.

Power LED

VP-9258(T) USER MANUAL 7