5-3 Mac OS 9.X or Above
1.This USB 2.0 External Drive is supported by Mass Storage Support Mac OS 9.X or above. You do not need to install any drivers.
2.When you plug this USB 2.0 Hard Disk into the USB port of your Mac computer, the mass storage volume should automatically appear on the desktop in a few seconds.
6.Using The USB 2.0 External Enclosure
After the first time installation, you can connect or disconnect the USB 2.0 External Enclosure
Please follow the steps below when using the
6-1 Connect the USB 2.0 External Enclosure VP-9258(T) to Computer
Step1:
Plug the first USB port connector of the USB cable into the USB port of your USB 2.0 External Enclosure
Step2:
Plug the second USB port connector of the USB cable into an USB port on your computer.
Step3:
Plug the power adapter power cord to the power inlet of your USB2.0 External Enclosure
Step4:
On the Monitor screen, click on [Start] and select [Control Panel] in [Settings]. Double click [System] and open [Hard disk controllers].
17 |