ViewCast 450E, 240E manual Audio driver, Selecting the audio source and input volume

Osprey 240e/450e User Guide

Audio driver

Setup and control for audio are much simpler than for video.

Selecting the audio source and input volume

You set the audio source using the Osprey mixer driver interface. Most applications, including the Windows Media Encoder applications, interface to the mixer driver directly and expose the look and feel specific to that application. However, you can also use the default Windows interface to the mixer driver. There are two simple methods for getting to the mixer source and volume control dialog box.

∙The easiest method for accessing this interface is to right click the speaker symbol on your taskbar (typically on the bottom right-hand side of your screen). Then select the Open Volume Control option (Figure 70). (There is a check box in Control Panel  Sounds and Audio Devices to make this icon appear.)

∙If you do not see the speaker symbol, click Start on the Start Menu, select Start  All Programs  Accessories  Entertainment  Volume Control.

Either of these two methods brings up the audio mixer interface for the audio playback device, as shown below.

Figure 70. Open Volume Control

Figure 71. Recording Control

To get to the Osprey audio capture (recording) device, select Properties under Recording Control options menu. The Properties dialog displays. Click on the Mixer device drop-down list at the top to see

ViewCast 81