Tag Queuing, Delete Volume Set | Areca ARC-1110, ARC-1130, ARC-1120

BIOS CONFIGURATION

• Tag Queuing

Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System

Areca Technology Corporation RAID Controller

Main Menu
Volume Set Function
Quick Volume/Raid Setup
Raid Create VolumeVolumeSet Creation
	Create Volume From Raid Set
Volume Set Function
Delete Volume Set		: Volume Set # 00
Physical Drives	Volume Name
Modify	Raid Set	#	5	00
Raid Syst m	Raid Level	:		01
Check Volume SetRaid Set		#
	Capacity	: 160.1GB
Ethernet Configuration
StopVolume Check		:	64K
	Stripe Size
View System Events
Display Volume Info.		:	0
Clear Event Buffer SCSI Channel
Hardware Monitor SCSI ID		: 0
System informationSCSI LUN		: 0
	Cache Mode	: Write Back
	Tag Queuing	: Enabled

ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

This option, when enabled, can enhance overall system perfor- mance under multi-tasking operating systems. The Command Tag (Drive Channel) function controls the SCSI command tag queuing support for each drive channel. This function should normally remain enabled. Disable this function only when using older drives that do not support command tag queuing.

3.7.3.2 Delete Volume Set

To delete volume set from a RAID set, move the cursor bar to the “Volume Set Functions” menu and select the “Delete Volume Set” item, then press the Enter key. The “Volume Set Func- tions” menu will show all Raid Set # items. Move the cursor bar to a RAID set number, then press the Enter key to show all volume sets within that Raid Set. Move the cursor to the volume set number that is to be deleted and press Enter to delete it.