BIOS CONFIGURATION
3.7.5 Raid System Function
To set the raid system function, move the cursor bar to the main menu and select the “Raid System Function” item and then press Enter key. The “Raid System Function” menu will show multiple items. Move the cursor bar to an item, then press Enter key to select the desired function.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu
Quick Volume/Raid Setup
Raid Set Function
Volume Set Function
Physical Drives
Raid System Function
Ethernet Configuration
View System Events
Clear Event Buffer
Hardware Monitor
System information
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
3.7.5.1 Mute The Alert Beeper
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main MenuRaid System Function |
| ||
Quick | Mute The Alert Beeper |
| |
Raid Set Function | Mute Alert Beeper | ||
| Alert Beeper Setting |
| |
Volume Set Function |
|
| |
| Change Password |
| Yes |
Physical Drives |
| ||
| JBOD/RAID Function | No | |
Raid System Function |
| ||
| Background Task Priority |
| |
Ethernet Configuration |
|
| |
| Maximum SATA Mode |
| |
View System Events |
|
| |
| HDD Read Ahead Cache |
| |
Clear Event Buffer |
|
| |
| Stagger Power on |
|
|
Hardware Monitor |
|
| |
| Empty HDD slot LED |
| |
System information |
|
| |
| HDD SMART Status Polling | ||
| Controller Fan Detection |
| |
| Disk Write Cache Mode |
| |
| Capacity Truncation |
| |
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
The “Mute The Alert Beeper” function item is used to control the SATA RAID controller Beeper. Select yes and press the Enter key in the dialog box to turn the beeper off temporarily. The beeper will still activate on the next event.
88
