WEB
•SNMP Trap Configurations Enter the SNMP Trap IP Address.
•SNMP System Configurations
About community, please refer to page 161 of SNMP commu- nity name. The system Contact, Name and Location that will be shown in the outgoing SNMP Trap.
•SNMP Trap Notification Configurations
Please refer to Appendix D of Event Notification table.
6.8.5NTP Configuration (12/16/24-port)
The Network Time Protocol (NTP) is used to synchronize the time of a computer client or server to another server or reference time source, such as a radio or satellite receiver or modem. It provides accuracies typically within a millisecond on LANs and up to a few tens of milliseconds on WANs relative to Coordinated Universal
Time (UTC) via a Global Positioning Service (GPS) receiver, for example:
•NTP Sever Address
The most important factor in providing accurate, reliable time is the selection of NTP servers to be used in the configuration file. Typical NTP configurations utilize multiple redundant servers and diverse network paths in order to achieve high accuracy and re- liability. Our NTP configuration supports two existing public NTP synchronization subnets.
145
