ARCHTTP PROXY SERVER INSTALLATION
(1).Run the archttp64 using Terminal.app by using the following command:
Usage: sudo ./archttp64 (TCP_PORT).
Parameters: TCP_PORT value= 1~65535 (If TCP_PORT assigned, Archttp will start from this port. Otherwise, it will use the setting in the archttpsrv.conf or default 81). This is the port address assigning for the first adapter.
Such as: sudo ./archttp64 1553
(2). Archttp server console started, Controller card detected then ArcHttp proxy server screen appears.
Copyright (c) 2004 Areca, Inc. All Rights Reserved.
Areca HTTP proxy server V1.80.240 for Areca RAID controllers.
Controller(s) list
Controller[1](PCI) : Listen to port[1553].
Cfg Assistant : Listen to port[1554]. Binding IP:[0.0.0.0]
Note: IP[0.0.0.0] stands for any ip bound to this host.
##############################
Press
##############################
Controller [1] Http: New client [9] accepted
Controller [1] Http: New Recv 243 bytes
Controller [1] Http: Send [174] bytes back to the client
5.6 ArcHttp Configuration
The ArcHttp proxy server will automatically assign one additional port for setup its configuration. If you want to change the "archttp- srv.conf" setting up of ArcHttp configuration, For example: General configuration, Mail Configuration, and SNMP Configuration, please start Web Browser by entering http://[Computer IP Address]:[cfg port number]
117
