Areca ARC-1120 manual Connect the Min SAS 4i to Multi-lance cable, 16, Min SAS 4i to Multi-lance

HARDWARE INSTALLATION

Figure 2-15, Min SAS 4i to 4*SATA

For Sideband cable signal Please refer to page 51 for SGPIO bus.

Step 5-4. Connect the Min SAS 4i to Multi-lance cable

Model ARC-1231ML/1261ML/1280ML have Min SAS 4i internal connectors, each of them can support up to four SATA drives. These controllers can be installed in a server RAID enclosure with a Multi- lance connector (SFF-8470) backplane. Multi-lance cables are not included in the ARC-12XXML package.

If you have not already connected your Min SAS 4i to Multi- lance cables, buy the Min SAS 4i to Multi-lance cables to fit your enclosure. And connect your controller to the Multi-lance connector backplane. The type of cable will depend on what enclosure you have. The following diagram shows one example picture of Min SAS 4i to Multi-lance cable.

Unpack and remove the PCI RAID cards. Inspect it carefully. If anything is missing or damaged, contact your local dealer.

Figure 2-16, Min SAS 4i to Multi-lance

43