Create Hot Spare, Delete Hot Spare | Areca ARC-1120, ARC-1110

BIOS CONFIGURATION

3.7.2.5 Create Hot Spare

Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System

Areca Technology Corporation RAID Controller

Main Menu
Raid Set Function
Quick Volume/Raid Setup
Create Raid Set
Raid Set Function
Delete Raid Set
Volume Set Function
	Select Drives For HotSpare, Max 3 HotSpare Supported
Expand Raid Set
Physical Drives
Activate		80.0GBST380013ASAre you Sure?
Raid System	[*]Ch05
Create Hot Spare			80.0GBST380013AS
Ethernet	[ ]Ch08			Yes
Delete Hot Spare
View System Events				No
Raid Set Information
Clear Event Buffer
Hardware Monitor
System information

ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

When you choose the “Create Hot Spare” option in the Raid Set Function, all unused physical devices connected to the current controller will result in the following:

Select the target disk by clicking on the appropriate check box. Press the Enter key to select a disk drive and press Yes in the “Create Hot Spare” to designate it as a hot spare.

The create Hot Spare option gives you the ability to define a global hot spare.

3.7.2.6 Delete Hot Spare

Select the target Hot Spare disk to delete by clicking on the ap- propriate check box.

Press the Enter keys to select a disk drive, and press Yes in the “Delete Hot Spare” window to delete the hot spare.