Areca ARC-1130 McBIOS Configuration manager, Change Password in the Raid System Function section

BIOS CONFIGURATION

Areca Technology Corporation RAID Controller Setup <V1.0, 2004/05/20>

Select An Adapter To Configure

( 3/14/ 0)I/O=DD200000h, IRQ = 9

ArrowKey Or AZ:Move Cursor, Enter: Select, ** Select & Press F10 to Reboot**

Use the Up and Down arrow keys to select the adapter you want to configure. While the desired adapter is highlighted, press the <Enter> key to enter the Main Menu of the McBIOS Configuration Utility.

Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System

Areca Technology Corporation RAID Controller

Note:

Main Menu

Quick Volume/Raid Setup Raid Set Function Volume Set Function Physical Drives

Raid System Function Ethernet Configuration View System Events Clear Event Buffer Hardware Monitor System information

Verify Password

The manufacture default password is set to 0000; this password can be modified by selecting

Change Password in the Raid System Function section.

ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw

3.2 McBIOS Configuration manager

The McBIOS configuration utility is firmware-based and is used to configure raid sets and volume sets. Because the utility resides in the SATA RAID controller firmware, operation is independent of any operating systems on your computer. This utility can be used to:

•Create RAID sets,

•Expand RAID sets,

57