Areca ARC-1130, ARC-1110, ARC-1120 manual Delete Pass-Through Disk, Identify Selected Drive

WEB BROWSER-BASED CONFIGURATION

When the “Enter Pass-Through Disk Attribute” screen appears, modify the drive attribute values, as you want.

After you complete the selection, mark the checkbox for “Confirm The Operation” and click on the “Submit” button to complete the selection action.

6.7.3 Delete Pass-Through Disk

To delete a pass-through drive from the pass-through drive pool, move the mouse cursor bar to the main menus and click the “De- lete Pass Through” link.

After you complete the selection, mark the checkbox for “Confirm The Operation” and click the “Submit” button to complete the delete action.

6.7.4 Identify Selected Drive

To prevent removal of the wrong drive, the selected disk LED will light so as to physically locate the intended disk when “Identify Selected Drive” is selected.

To identify the selected drive from the drives pool, click “Identify Selected Drive”. The “Select The IDE Device For Identification” screen appears mark the checkbox for the IDE device from the drive pool and select the Flash method. After completing the se- lection, click on the “Submit” button to identify selected drive.

137