![](/images/new-backgrounds/1148672/148672139x1.webp)
BIOS CONFIGURATION
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu |
|
Raid Set Function |
|
Quick Volume/Raid Setup |
|
Create Raid Set |
|
Raid Set Function |
|
The Raid Set Information | |
Delete Raid Set |
|
Volume Set Function |
|
Expand | : Raid Set # 00 |
Physical DrivesRaidSet Name | |
Activate Raid S t | : 4 |
Raid System FunctionMember Disks | |
Create Hot Spare | : Migrating |
Ethernet ConfigurRaidtionState | |
Delete Hot Spare | : 160.1GB |
View System EventsTotal Capacity | |
Clear Raid Set FreeInformCapacitytion | : 144.1GB |
Hardware MonitorMin Member Disk Size : 40.0GB | |
System informationMember Disk Channels : 1234 |
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
Migration occurs when a disk is added to a RAID set. Migration status is displayed in the raid status area of the Raid set infor- mation screen when a disk is being added to a Raid set. Migrat- ing status is also displayed in the associated volume status area of the Volume Set Information when a disk is added to a RAID set.
3.7.2.4 Activate Incomplete Raid Set
The following screen is shows “Raid Set Information” after one of its disk drive was removed in the power off state.
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main Menu |
|
| |
| Raid Set Function |
| |
Quick Volume/Raid Setup |
| ||
| Create Raid Set |
| |
Raid Set Function |
| ||
| Delete Raid Set |
| |
Volume Set FunctionThe Raid Set Information | |||
| Expand Raid Set | : Raid Set # 00 | |
Physical Drives | Raid Set Name | ||
Raid | Active Raid Set | : 4 | |
|
| Member Disks | |
| Create Hot Spare |
| |
Ethernet Configuration | : Migrating | ||
|
| Raid State | |
| Delete Hot Spare |
| |
View System Events | : 160.1GB | ||
|
| Total Capacity | |
| Raid Set Inf rmation |
| |
Clear Event Buffer |
| ||
Hardware MonitorFree Capacity | : 144.1GB | ||
|
| Min Member Disk Size : 40.0GB | |
System information |
| ||
|
| Member Disk Channels : 1234 |
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
When one of the disk drives is removed in power off state, the Raid set state will change to Incomplete State. If a user wants to continue to work while the SATA RAID controller is powered on, the user can use the “Activate Raid Set” option to active the RAID set. After user selects this function, the Raid State will change to Degraded Mode.
70