BIOS CONFIGURATION
3.7.5.2 Alert Beeper Setting
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main MenuRaid System Function
Quick VolMume/RaidteThe AlertSetupBeeper
Raid Alert Beeper Setting
Volume Set Function Alert Beeper Setting
Change Password
PhysicalJBOD/RAIDDrives Function Disabled
Raid SystemBackgroundFunctionTask PriorityEnabled
EthernetMaximumConfigurationSATA Mode
View SystemHDD ReadEventsAhead Cache
Clear EventStaggerBufferPower on
HardwareEmptyMonitorHDD slot LED
System HDDinformationSMART Status Polling
Controller Fan Detection
Disk Write Cache Mode
Capacity Truncation
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
The “Alert Beeper Setting” item is used to Disabled or Enable the SATA RAID controller alarm tone generator. Select “Disabled” and press the Enter key in the dialog box to turn the beeper off.
3.7.5.3 Change Password
Controller I/O Port:F3000000h, F2: Select Controller, F10: Reboot System
Areca Technology Corporation RAID Controller
Main MenuRaid System Function
Quick VolMume/RaidteThe AlertSetupBeeper Raid SetAlertFunctionBeeper Setting VolumeChange Password
PhysicalJBOD/RAIDDrives Function Raid SystemBackgroundFunctionTask Priority EthernetMaximumConfigurationSATA Mode View SystemHDDReadEventsAhead Cache Clear EventStaggerBufferPower on HardwareEmptyMonitorHDD slot LED SystemHDDinformationSMART Status Polling
Controller Fan Detection
Disk Write Cache Mode Capacity Truncation
Enter New Password
ArrowKey Or AZ:Move Cursor, Enter: Select, ESC: Escape, L:Line Draw, X: Redraw
The manufacture default password is set to 0000. The password option allows user to set or clear the password pro- tection feature. Once the password has been set, the user can monitor and configure the controller only by providing the cor-
89
