Areca ARC-1110, ARC-1130, ARC-1231ML/1261ML/1280ML, ARC-1120 manual For Solaris 10, For Mac OS

ARCHTTP PROXY SERVER INSTALLATION

5.4 For Solaris 10 x86

You must have administrative level permissions to install SATA RAID software. This procedure assumes that the SATA RAID hardware and FreeBSD are installed and operational in your system.

The following details Solaris installation procedure of the SATA RAID controller software.

1.Insert the RAID subsystem CD in the CD-ROM drive.

2.Copy <CD-ROM>\PACKAGES\Solaris\http directory to local The next following step is the same with Linux. Please see section 5.2 For Linux.

5.5 For Mac OS 10.x

The McRAID manager interface can be accessed through the built- in configuration and administration utility that resides in the con- troller’s firmware. It provides complete control and management of the controller and disk arrays, eliminating the need for additional hardware or software.

The ArcHttp proxy server is provided on the CD-ROM delivered with SATA card or download from the www.areca.com.tw. The firmware embedded McRAID storage manager can configure and monitor the SATA RAID controller via ArcHttp Proxy Server.

1. Login as root. Copy the ArcHttp file to a local directory.

(1). Insert the SATA RAID controller CD in the CD-ROM drive.

(2). Copy <CD-ROM>\PACKAGES\Mac\http directory to local. Or

(1). Download from the www.areca.com.tw or from the email attachment.

2.You must have administrative level permissions to install SATA RAID controller ArcHttp software. This procedure assumes that the SATA RAID hardware and Mac driver are installed and operational in your system.

The following details are the installation procedure of the SATA RAID controller for Mac ArcHttp software.

116