![](/images/new-backgrounds/1148672/148672223x1.webp)
ARCHTTP PROXY SERVER INSTALLATION
5. ArcHttp Proxy Server Installation
Overview
After hardware installation, the SATA disk drives connected to the SATA RAID controller must be configured and the volume set units initialized before they are ready to use.
The user interface for these tasks can be accessed through the
In addition, a software utility to configure the SATA RAID is provided on the
Configuration Utility | Operating System supported |
|
|
McBIOS RAID Manager | |
|
|
McRAID Storage Manager | Windows 2000/XP/2003, Linux, FreeBSD |
(Via Archttp proxy server) | NetWare, UnixwWare, Solaris and Mac |
|
|
SAP Monitor (Single Admin portal to | Windows 2000/XP/2003 |
scan for multiple RAID units in the net- |
|
work, Via ArcHttp Proxy Server) |
|
|
|
From version 1.6 and later, the HTTP management software (ArcHttp) runs as a service or daemon, and have it automatically start the proxy for all controllers found. This way the controller can be managed re- motely without having to sign in the server. The HTTP management software (ArcHttp) also has integrated the General Configuration, Mail Configuration and SNMP Configuration. Those can be configured in lo- cal or remote standard web browser.
Note:
If your controller have onboard LAN port, you don't need to install ArcHttp proxy Server, you can use McRAID Storage Manager directly.
112