To create pass-through disk, move the mouse cursor to the main menu and click on the “Create Pass-Through” link. The “rela- tive setting function” screen appears. A pass-through disk is not controlled by the SATA RAID controller firmware, it cannot be a part of a volume set. The disk is available to the operating system as an individual disk. It is typically used on a system where the operating system is on a disk not controlled by the RAID firm- ware. The user can also select the cache mode, Tagged Command Queuing, SCSI channel/SCSI_ID/SCSI_LUN for this volume.
6.7.2 Modify Pass-Through Disk
Use this option to modify the “Pass-Through Disk Attribute”. The user can modify the cache mode, Tagged Command Queuing, and SCSI channel/ID/LUN on an existing pass through disk.
To modify the pass-through drive attribute from the pass-through drive pool, move the mouse cursor bar and click on the “Modify Pass-Through” link. The “Select The Pass Through Disk For Modi- fication” screen appears mark the checkbox for the Pass-Through Disk from the pass-through drive pool and click on the “Submit” button to select drive.
