Areca ARC-1120, ARC-1110, ARC-1130, ARC-1231ML/1261ML/1280ML manual For FreeBSD, For Mozilla user

ARCHTTP PROXY SERVER INSTALLATION

Usage: ./archttp32 (TCP_PORT) or ./archttp64 (TCP_PORT). It depends on your OS version.

Parameters: TCP_PORT value= 1~65535 (If TCP_PORT assigned, Archttp will start from this port. Otherwise, it will use the setting in archttpsrv.conf )

4. Runing the ArcHttp file then ArcHttp screen appears.

Copyright (c) 2004 Areca, Inc. All Rights Reserved.

Areca HTTP proxy server V1.80.240 for Areca RAID controllers.

Controller(s) list

--------------------------------------------

Controller[1](PCI) : Listen to port[81].

Cfg Assistant : Listen to port[82].

--------------------------------------------

##############################

Press CTRL-C to exit program!!

##############################

3.See the next chapter detailing the McRAID Storage Manager to customize your RAID volume set.

For Mozilla user:

Because our management need Java support, so user may need upgrade to version 1.6 or later.

5.3 For FreeBSD

You must have administrative level permissions to install SATA RAID software. This procedure assumes that the SATA RAID hardware and FreeBSD are installed and operational in your system.

The following details FreeBSD installation procedure of the SATA RAID controller software.

1.Insert the RAID subsystem CD in the CD-ROM drive.

2.Copy <CD-ROM>\PACKAGES\FreeBSD\http directory to local The next following step is the same with Linux. Please see section 5.2 For Linux.

115