![](/images/new-backgrounds/1148672/148672309x1.webp)
APPENDIX
• Flash Procedure
1.Power off system and remove power cable.
2.Take RAID controller out.
3.Set a Close Cap on the J3/J7 2x5 connector.
4.Plug RAID controller back to M/B.
5.Reconnect power cable and boot up from DOS.
6.Flash controller.
7.After flash procedure compeleted, then power off system.
8.Remove power cable then take Raid controller out and remove the close cap.
9.Plug Raid controller back to M/B, connect power cable, and power on your system.
155