HP 4100 manual Removing the Battery or Plug-In Module, Removal Procedure

Removing the Battery or Plug-In Module

(User-Replaceable)

Required Equipment

∙None.

Removal Procedure

1.Unplug the ac adapter, if present.

2.Slide forward the module latch slider on the corner next to the module, then swing back the latch to loosen the module.

3.Pull out the module.

4.Slide the latch back into the case.

Figure 2-1. Removing the Battery or Plug-In Module

Reassembly Notes

∙Important: You must slide the latch forward before you can insert a module.

∙You can install a battery in either bay. But any other type of module must be installed in only the left bay.

HP OmniBook 4100 Removal and Replacement 2-3