![](/images/backgrounds/288757/hp-laptop-4100-users-manual-54703525x1.png)
Removing the Hard Disk Drive
Table
Description | Part Number | Exchange |
|
| Part Number |
|
|
Drive, hard disk (4.0GB, IBM)
Drive, hard disk (4.0GB, Toshiba)
Drive, hard disk (6.4GB, IBM)
Required Equipment
∙Small Phillips screwdriver.
∙Small
Removal Procedure
1.Unplug the ac adapter, if present, and remove the battery.
2.Turn the unit bottom side up.
3.Remove the hard drive screw from the bottom case.
4.Pull out the hard drive by its plastic tab.
Screw, M3×4mm
Figure
5.If you are installing a new hard drive that does not have a cover, you can remove the cover parts from the old hard drive:
∙Remove the screw from the case, then pry open the flap. If necessary, use a
∙Use a
∙Pry out the corner next to the connector, then lift out the connector and hard drive together.
∙Unplug the internal connector and cable from the hard drive.
HP OmniBook 4100 | Removal and Replacement |