Table
Component
Keyboard
Strip Cover
Top Case
Removal Procedures
See page
Display (page
See page
Top case (page
Top case (page
Additional Steps
Unsnap the strip cover from the hinge covers.
1.Remove the two screws holding the support assembly to the top case.
2.Peel off the four pads of the flex cable from the support plate.
3.Release the flex cable from the PCA.
Reassembly Notes: Position the four pads using the bumps on the support plate.
Check the feel and operation of all four click buttons.
Caution: Do not press on the round switches on the four pads. Press next to the switches.
Remove the two screws holding the support assembly to the top case.
Reassembly Notes: Check the feel and operation of all four click buttons.
Table
Component
Air Vent Cover
Audio Jack Cover
Audio Jack PCA
BIOS IC
Bottom Case
Removal Procedures
Top case (page
Top case (page
Top case (page
See page
See page
Additional Steps (See figures on pages
1.Remove the screw from the plastic heat exchange cover and remove the cover.
2.Lift off the fan and move it aside.
3.Remove the screw from the heatsink cover and remove the cover.
4.Remove the screws from the CPU top plate and remove the plate.
5.Remove the screw holding the left frame to the motherboard and lift off the frame.
6.Lift out the air vent cover.
1.Remove the screw from the IR PCA and move the PCA aside.
2.Remove the two screws from the right frame and remove the frame.
3.Lift the
1.Remove the screw from the IR PCA and move the PCA aside.
2.Remove the two screws from the right frame and remove the frame.
3.Unplug the
4.Unplug the audio jack PCA.
HP OmniBook 4100 | Removal and Replacement |