APPENDIX
Starting the SNMP function setting
• Community Name
Community name acts as a password to screen accesses to the SNMP agent of a particular network device. Type in the community names of the SNMP agent. Before access is granted to a request station, this station must incorporate a valid community name into its request; otherwise, the SNMP agent will deny access to the system.
Most network devices use “public” as default of their community names. This value is
SNMP Extension Agent Installation for Windows
You must have administrative level permission to install SATA RAID software. This procedure assumes that the SATA RAID hardware and Windows are both installed and operational in your system.
To enable the SNMP agent for Windows, configure Windows for TCP/IP and SNMP services. The ARECA SNMP Extension Agent file is ARCSNMP.DLL.
Screen captures in this section are taken from a Windows XP instal- lation. If you are running another version of Windows, your screens may look different, but the ARECA SNMP Extension Agent installa- tion is essentially the same.
1.Insert the SATA RAID controller CD in the
2.Run the setup.exe file that resides at:
161
