Areca ARC-1130, ARC-1110, ARC-1120 Install the controller driver, Install ArcHttp proxy Server

HARDWARE INSTALLATION

Step 10. Install the controller driver

For a new system:

•Driver installation usually takes places as part of operating sys- tem installation. Please reference the Chapter 4 Diver Installation for the detail installation procedure.

In an existing system:

•Install the controller driver into the existing operating system. Please reference the Chapter 4, Driver Installation, for the detailed installation procedure.

Note:

Look for newest release versions of drivers please download from http://www.areca.com.tw

Step 11. Install ArcHttp proxy Server

The SATA RAID controller firmware has embedded the web-browser RAID manager. ArcHttp proxy driver will enable it. The browser- based RAID manager provides all of the creation, management, and monitor SATA RAID controller status. Please refer to the Chapter 5 for the detail ArcHttp proxy server installation. For SNMP agent function, please refer to Appendix C.

Step 12. Determining the Boot sequences

The SATA RAID controller is a bootable controller. If your system already contains a bootable device with an installed operating sys- tem, you can set up your system to boot a second operating sys- tem from the new controller. To add a second bootable controller, you may need to enter setup and change the device boot sequence so that the SATA RAID controller heads the list. If the system BIOS setup does not allow this change, your system may not be con- figurable to allow the SATA RAID controller to act as a second boot device.

53