APPENDIX

• Mode 0 Flash Jumper function:

Short: Causes cpu core to be held in rest (mode 0). Arcflash utility can upgrade the entire Flash ROM image.

Open: This is the normal default board operation.

The jumper name for each adapter to upgrade entire flash ROM im- age as following:

ARC-1110/1120/1210/1220/1170 for 4/8/24 ports → J3 ARC-1130(ML)/1160(ML)/1230/1260 for 12/16 ports J7 ARC-1230ML/1260ML/1280ML/1280 for 12/16/24 ports J2

Note:

The Mode 0 Flash jumper is a 2x5 connector without housing, located on the left of card near bracket. The header size is 0.65mm and pitch size is 2.54mm.

• Starting the Arcflash Utility

Arcflash utility provides an on-line table of contents, providing brief descriptions of the help sub-commands. You can use the <arcflash> /? to get detail information about the command. Typical output looks as below:

154

Page 154
Image 154
Areca ARC-1231ML/1261ML/1280ML, ARC-1110, ARC-1130, ARC-1120 Mode 0 Flash Jumper function, Starting the Arcflash Utility