D9400/D9410
Series Monitor Specifications 
D9400
D i g i t a l M o n i t o r
P u s h B u t t o n
C o n t r o l B o a r d
O n - S c r e e n D i s p l a y
D9410
Power Input
•Input voltage:
•Maximum power: 80 watts type; 95 watts Max.
Resolution
Graphics mode: CGA: 640 X 240 EGA: 773 X 384 VGA: 640 X 200, 640 X 350, 640 X 480
SVGA: 800 X 600
• Video bandwidth: 70 MHz typical.
Miscellaneous
•105 Degree Capacitors for long life and reliability.
•Operating temperature: 0 to 55 degree C.
•Agency compliance: UL, CUL, DHHS.
Specification
•CRT size (diagonal measure): 27", 33" (OPTIONAL)
•Phosphor type: P22
•Color Temperature: 9300ºK /8500K ± 300ºK/User Adjustable
•Dot trio spacing: 0.83 mm (27"), 0.92mm (33")
Input Signals
•Video Input connector 1:15 pin
•Video Input connector 2: 10 pin connector Analog 2.2 to 4 volt level at 250/350 Ohm; CGA/EGA 0.156 center header.
•Sync type: TTL & Standard CGA / EGA / VGA/ sync (positive or negative).
•Sync input: Separate or composite sync from 1 volt to 5 volt input.
•Sync Input Impedance: 2.2K Ohm (H sync and V sync)
•Horiz. / Vert. sync frequency: 15.75 to 40 KHz / 40 to 100 Hz.
Light Output
• 70
Geometry
• Horizontal linearity: Less than 7% Vertical linearity: Less than 5%
•Picture size regulation: 2%
•Geometric distortion: ±2% max.
User Controls Digitally Controlled
•Brightness, contrast, horizontal position, vertical position, horizontal size, vertical size, pin cushion, trapezoid, bow, parallel, OSD H position,OSD V position, OSD timer, degauss, color , language, Recall (factory reset), exit.
•Tilt, OSD menu
•Automatic Degauss: Manual Degauss, OSD menu.
Specification subject to change without notice.
9500 W. 55th Street, Suite A McCook, IL 60525
Tel:
Fax: