Epson TM-FX2180 Resolution, Printable Area, Printing Mode, Vertical Adjacent Dot Density dpi

EPSON FX-2180 Service Manual

1.1.3 Resolution
	Table 1-2. Resolution
Printing Mode	Horizontal	Vertical	Adjacent Dot
	Density (dpi)	Density (dpi)	Printed
High speed draft	90	72	No
Draft	120	72	No
Draft condensed	240	720	No
Draft emphasized	120	72	Yes
NLQ	240	144	No
Bit image	60, 72, 80, 90,	72	Yes
	or 120
	120 or 240	72	No

1.1.4 Printable Area

‰ Single sheets

	PW
LM	RM
	TM

	Chapter 1 Product Description
	Table 1-3. Printable Area for Single Sheets
	Single Sheets	Single-sheet Multi-part
		Forms
PW (width)	See Table 1-8	See Table 1-9
PL (length)	See Table 1-8	See Table 1-9
LM (left	0.12 in. (3 mm) or more	0.12 in. (3 mm) or more
margin)	(PW ≤ 14.33 in. or 364 mm)	(PW ≤ 14.33 in. or 364 mm)
	0.98 in. (25 mm) or more	0.98 in. (25 mm) or more
	(PW = 16.5 in. or 420 mm)	(PW = 16.5 in. or 420 mm)
RM (right	0.12 in. (3 mm) or more	0.12 in. (3 mm) or more
margin)	(PW ≤ 14.33 in. or 364 mm)	(PW ≤ 14.33 in. or 364 mm)
	0.98 in. (25 mm) or more	0.98 in. (25 mm) or more
	(PW = 16.5 in. or 420 mm)	(PW = 16.5 in. or 420 mm)
TM (top	0.17 in. (4.2 mm) or more	0.17 in. (4.2 mm) or more
margin)
BM	0.17 in. (4.2 mm) or more	0.17 in. (4.2 mm) or more
(bottom
margin)

Note: The maximum horizontal printable area is 13.6 inches (345.2 mm).

	PL
printable area

BM

Figure 1-2. Printable Area for Single Sheets

1-2