User Manual
Configuration, Continued
Mail handler configuration (continued)
Step | Action |
5From name: Enter a name to identify the sender as the SMS Bridge system. The receiver sees this name in the inbox.
6Administrator
7Click Save configuration to save the changes.
8Click the Test button to send a test message from the SMS Bridge to the administrator.
9Close the configuration screen and start the service.
SMS bridge configuration
The SMS Bridge is
| Step | Action |
|
| 1 | Click SMSBridge in the main screen. |
|
| 2 | Click the Config button. The configuration screen opens. |
|
|
|
|
|
| 3 | Log interface host: This is the host name for the GMS log interface. |
|
|
| The setting to use is |
|
|
| In rare cases it may be necessary to enter the IP address for the |
|
|
| interface. The IP address is currently 195.249.110.24 but is subject to |
|
|
| change. |
|
| 4 | Log interface port: The value for this setting is 10000. |
|
| 5 | Close the window and start the service. The service is functioning |
|
|
| correctly if STARTED appears in the Status field. |
|
|
|
| |
|
| Continued on next page |
Configuration | YORK Marine, Controls |
Revision 1.3 · Updated: 070507 | Author: Marc Anderson · Owner: RS |
Project : SMS Bridge | Page 8 of 15 |
File: e:\york\sms |
|