York SMS Bridge user manual Configuration

Page 9

User Manual

Configuration, Continued

SMS Handler Configure the SMSHandler as follows. configuration

Step

Action

1Click SMSHandler in the main screen.

2Click the Config button. The configuration screen opens.

3

SIM PIN code: Enter the PIN code for the SIM card.

NOTE: Verify that the PIN code is correct! The SMSHandler transmits the PIN code to the modem three times, which may result in blocking of the SIM card if the code is incorrect. See Troubleshooting if the SIM card is blocked.

The PIN code field is not used if SIM card’s PIN code request is disabled.

Continued on next page

Configuration

YORK Marine, Controls

Revision 1.3 · Updated: 070507

Author: Marc Anderson · Owner: RS

Project : SMS Bridge

Page 9 of 15

File: e:\york\sms bridge\manual\smsbridge-manual_13.doc

 

Page 8 Page 10
Image 9
Page 8 Page 10
Contents SMS Bridge Table of Contents Introduction York Marine, Controls IntroductionSMSHandler service MailHandler serviceSMSBridge service ServicesRequirements York Marine, Controls RequirementsInstallation ActionStep Action Configure the MailHandler as follows ConfigurationConfiguration Mail handlerMail handler configuration Setting to use is logif.reefers-online.comSMS bridge configuration Configuration York Marine, ControlsConfiguration SMS Handler configuration Baud rate SelectGSM char set Select GSM Normal operation RefLine/RefBox configuration OperationOperation York Marine, Controls Troubleshooting York Marine, Controls TroubleshootingMonitoring ActivityProblem Likely Cause Solution MailHandlerSMSBridge SMSHandler Mail error messages Document Revision Record York Marine, Controls Rev Date Author Brief description of change Pages affected
Top Page Image Contents