Z-Com R1 Extender manual System Installation, Assemble the Mounting Bracket

Chapter 3 System Installation

Assemble the Mounting Bracket

1.Place the main bracket into the seating and use a spanner to fasten the bracket to the R1 Extender with M5×16 screws ⑧ and M5 washers ⑨ provided in the hardware packets;

2.Assemble the main bracket by placing articulation pole ② to the T-form bracket ① via a M8×90 ④ screw through the insertion axe and fix with the M8 washer ⑤ , spring washer ⑥ and M8 nut⑦;

Chapter 3 System Installation Page 7