Installing the Dial Pad Battery
Black
Red
White
1Remove the belt clip
by pulling one side of the belt clip to release the tab from the hole.
2Squeeze the latch on the battery compartment cover and lift the cover.
3Connect the Battery Pack connector.
Do not force. Plastic connectors will fit in only one way.
4Insert battery pack into the battery compartment.
5Insert tabs of cover into slots and push down to securely close the cover.
Wearing the Dial Pad with the Belt Clip
Cable route
1Plug the headset cord into the 2.5mm jack on the top of the dial pad.
2Route the cord through the dial pad’s cable routing slot on the back of the dial pad.
Attach the belt clip only after you have routed the cord.
3Insert the tabs on the sides of the belt clip into the holes on either side of the dial pad.
Press the belt clip down until it clicks into place.
To remove the belt clip pull one side of the belt clip to release the tab from the hole.
en
4 | 5 |
