Settings
Re-registering the Dial Pad
After the dial pad is
1Place the dial pad in the base cradle for several seconds.
2When the dial pad has registered to the base, the LCD will display Registration complete, then show the dial pad ID number.
If the display shows Registration failed, try the process again.
Calling Features
Muting the Ringer (Temporarily)
The dial pad must be off the base to mute the ringer.
1While the phone is ringing, press 
or 
to mute the ringer for this call.
2The phone will ring again on the next call.
Placing a Call on Hold
1During a call, press 
to place the caller on hold. The display screen will read Line On Hold.
2To return to the party on hold, press 
. The phone will return to the holding party.
NOTE Once five minutes has passed, the on hold party’s line will be disconnected.
Redialing a Number
You can quickly redial the last five numbers dialed on each dial pad.
1With the phone in standby, press the 
to open the redial list.
2Use 
and 
or 
to scroll through the redial list.
3When you find the number you want to dial, press 
.
NOTE You can also press |
| before you open the |
|
|
redial list. Find the phone number you want to dial, and then press |
| . | ||
14
Calling Features
Deleting a Redial Record
1With the phone in standby, press 
.
2Use 
and 
to scroll through the redial list.
3When you find the redial number you want to delete, press 
and select Delete Entry.
4When the phone asks you to confirm, select Yes.
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the Audio Tone of the headset while on a call. Your phone gives you three audio tone options: Low, Natural and High; the default setting is Natural Tone.
1To adjust the audio tone while on a call, press 
.
2Move the cursor to select Audio Tone, and then press 
.
3Move the cursor to select desired option and then press 
to confirm.
Locating the Dial Pad
1To locate a misplaced dial pad, press PAGE on the base when the phone is in standby.
2The dial pad(s) connected to the paging base will beep for one minute, and Paging appears on the dial pad display.
3To cancel paging, press PAGE again or any key on the found dial pad.
Low Battery Alert |
| |
When Low Battery - Charge Handset appears | en | |
in the dial pad display and the phone is in standby, | ||
| ||
none of the keys will operate. |
|
If you are on a call, complete your conversation as quickly as possible, and return the dial pad to the cradle. The battery pack needs to be charged when the empty battery icon appears.
15
