Placing, Receiving and Ending Calls
Placing Calls
Press 
and listen for the dial tone. Dial the number.
OR
Dial the number and then press 
.
Receiving Calls
1Press 
.
(If Any Key Answer is on, press any key on the dial pad.)
2If dial pad is on base, pick up the dial pad and press 
.
(If Auto Talk is on, the phone will answer when you pick up the dial pad from the base.)
For information on setting up Any Key Answer or Auto Talk, see page 11.
Ending Calls
Press 
or return the dial pad to the base.
Adjusting Volume and Muting Calls
Adjusting Volume
You can adjust the headset listening volume while you are on a call using 
or 
. You can choose from six volume levels.
Muting Calls
1During a call, press 
.
Mute On appears briefly on the display
2The mute icon 
will also appear in the display and remain on the screen until muting is canceled.
3To cancel muting, press 
again.
Mute Off appears briefly and the mute icon 
will disappear.
Traveling Out-of-Range
Your CT14 has a range of up to 300 ft. from the charging base. If you travel out of range while the dial pad is in standby, the dial pad will display Out Of Range, and you will not be able to place/answer calls.
If you travel out of range while on a call, the dial pad will beep, display Out Of Range, and then go to standby. The base will maintain the connection for 30 seconds after the dial pad goes out of range.
If you move the dial pad back within range of the base within 30 seconds, press 
to pick up the call again.
Settings
Language Setup
Your dial pad supports three languages: English, French and Spanish. The default language is English.
1To select a different language, press 
.
2Use 
or 
to select Handset Setup menu, then press 
.
3Use 
or 
to select Handset Language submenu, then press 
.
4Move the cursor to choose English, Français (French) or Español (Spanish).
5Press 
to confirm.
Time and Day Setup
1To change the day or time shown in the display, press 
.
2Move the cursor to Day & Time and press 
.
3Use 
or 
to select the day of the week, and press 
.
4Use the number keypad (0 through 9) to enter the hour and minutes.
5Use 
or 
to select AM or PM, and press 
. You will hear a confirmation tone.
NOTE With the phone in standby, the day of the week does not appear on the dial pad display.
en
8 | 9 |
