Waves MV2 user manual Loading Presets and Setups, Saving Presets and Setups, Save to New File…

Loading Presets and Setups

Click-and-holdon the Load button to see the Load pop-up menu. The menu is divided into four sections. If a section is not currently available it will not appear in the Load pop- up menu.

Open Preset File… Select to open any setup or preset file, whether from the Library or your own creations.

‘Filename.xps’: Displays any currently loaded Setup File and its presets.

Factory Presets: Displays the default Factory Presets.

User Presets: Displays any loaded User Presets.

Saving Presets and Setups

Click-and-hold on the Save button to see the Save pop-up menu. Four options are available. If an option is not currently available it will be grayed out and inaccessible.

Save to New File…	Select this to start a new Setup file. There are two
	prompts - first for the setup filename, then for the
	preset name. You must provide a name for both the
	setup file and the preset. Click OK (ENTER) to
	complete the save. It is a good idea to create a
	folder in which to save several setup files for a
	project.
Save ‘File Name’ – “Preset Name” Overwrites the settings of the loaded preset
	(whether a User Preset or a preset from a Setup
	File) with the current settings. If a Setup File is
	currently loaded, the name of the Setup File is
	displayed followed by the name of the preset itself.
	If a User Preset is loaded, its name is displayed.
Save to ‘File Name’ As…	Saves the current settings as a new preset into the
	Setup file that is open (if one is not open, the option
	is grayed out). You will be prompted to give the
	preset a name.
Put into Preset Menu As…	Save the current settings into a User Preset that
	will always be in your Load menu (until deleted).

You will be prompted to give this preset a name. User Presets are stored in the plug-in’s preference file.

MV2 User Manual 10