3RECORD SET
3 Set “ALARM RECORDING AREA” to
49% and turn the shuttle dial to the right.
The cursor moves to “AREA FULL RESET.”
| <RECORDING AREA SET> |
|
|
| ||
TOTAL CAPACITY |
|
| : | 82GB | ||
NORMAL RECORDING AREA | : | 50 | % | |||
| AREA FULL RESET |
|
|
|
| |
ALARM RECORDING AREA |
|
| : | 49 | % | |
| AREA FULL RESET |
|
|
|
| |
ARCHIVE AREA |
|
| : | 1 | % | |
|
|
|
|
|
|
|
| AREA FULL RESET |
|
|
|
| |
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
4 Turn the shuttle dial counter- clockwise.
The <WARNING> screen is displayed. The screen contains a message regarding initialization of the hard disk.
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU
SURE ?
NO
CHANGE:JOG SET:SHUTTLE
5 To change the recording area, turn the jog dial to display “YES”.
<WARNING>
THIS CHANGE WILL INITIALIZE THE DISK.
ALL RECORDING WILL BE ERASED.
ARE YOU SURE ?
YES
CHANGE:JOG SET:SHUTTLE
zIf the shuttle dial is turned clockwise while “NO” is selected, the <RECORDING AREA SET> screen will be displayed and the recording capacities will revert to their previous settings. In other words, the new settings will not be adopted.
6 Turn the shuttle dial clockwise.
(1) The hard disk is initialized.
HDD INITIALIZING !
(2)The <RECORD SET> screen appears and the modified recording capacities are adopted.
7 Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to the normal screen.
EXIT/OSD
Setting overwrite permission
Set whether to continue recording and automatically overwrite data, or stop recording and not overwrite data when the normal recording area and alarm recording area become full (Setting recording conditions (JP.67)). Default setting is to automatically overwrite.
If the setting to not overwrite is selected, recording stops at the point where remaining capacity runs out. In this case, recording can be continued using the following steps to authorize overwriting.
Also, data is not overwritten automatically to archive area. Follow the steps below to authorize overwriting each time data is full.
1 Set the items in “Setting overwriting for the normal recording area”. (JP.67)
Set “OVERWRITE” to “OFF.”
SETTINGS
66 | English |
