3RECORD SET
2 Turn the jog dial to select “2. RECORDING AREA SET” from the <RECORD SET> screen, and then turn the shuttle dial clockwise.
The <RECORDING AREA SET> screen is displayed.
<RECORDING AREA SET> |
|
|
| |
TOTAL CAPACITY |
| : | 82GB | |
|
|
|
| |
NORMAL RECORDING AREA | : | 80 | % | |
AREA FULL RESET |
|
|
| |
ALARM RECORDING AREA |
| : | 19 | % |
AREA FULL RESET |
|
|
| |
ARCHIVE AREA |
| : | 1 | % |
AREA FULL RESET |
|
|
| |
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
3 Turn the jog dial to select “AREA FULL RESET”, and then turn the shuttle dial clockwise.
“NO” on the <WARNING> screen flashes.
<WARNING>
AREA FULL RESET
ARCHIVE AREA
ARE 
SURE ?
Flashing 
NO 
CHANGE:JOG SET:SHUTTLE
4 Turn the jog dial to select “YES”, and then turn the shuttle dial clockwise.
“NORMAL RECORDING AREA” is set to overwrite once.
5 Use the same procedure to make settings for the “ALARM RECORDING AREA”.
| <RECORDING AREA SET> |
|
|
| ||
TOTAL CAPACITY |
|
| : | 82GB | ||
NORMAL RECORDING AREA | : | 80 | % | |||
| AREA FULL RESET |
|
|
|
| |
ALARM RECORDING AREA |
|
| : | 19 | % | |
| AREA FULL RESET |
|
|
|
| |
ARCHIVE AREA |
|
| : | 1 | % | |
| AREA FULL RESET |
|
|
|
| |
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
6 Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to the normal screen.
EXIT/OSD
zTo perform overwriting automatically, set “OVERWRITE” for either “NORMAL RECORDING AREA” or “ALARM RECORDING AREA” from <RECORDING CONDITIONS SET> screen to “ON”. (JP.67)
zWhenever “AREA FULL RESET” is performed for “NORMAL RECORDING AREA” or “ALARM RECORDING AREA”, the video recorded in the corresponding area will be overwritten.
zImages in the archive area are erased when “AREA FULL RESET” is performed for the archive area.
Setting recording conditions
Use the following setting procedure to indicate whether overwriting is to be performed (deleting old video) or recording is to be stopped when any of the hard disk’s recording areas become full.
Setting overwriting for the normal recording area
1 Turn the jog dial to select “OVERWRITE” for normal recording area, and then turn the shuttle dial clockwise.
“ON” flashes.
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA |
|
OVERWRITE | ON |
ALARM RECORDING AREA |
|
OVERWRITE | : |
REMAINING DISK WARNING | : ** |
SERIES REC | : OFF |
AUTO DELETE | : OFF |
English | 67 |
