Sanyo DSR-3709P manual When pre-alarm recording settings have been completed

3RECORD SET

2 Turn the jog dial to change “OFF” to “ON”, and then turn the shuttle dial clockwise.

A message appears indicating automatic rate adjustment. “NO” flashes.

[Settings] (‹ indicates default setting)

Setting	Description
‹OFF	Pre-alarm recording is not carried out.
ON	Pre-alarm recording is carried out.

3 Turn the jog dial to select “YES” for warning message, and then turn the shuttle dial clockwise.

The cursor moves to recording rate and duration.

<WARNING>

REC RATE SETTING IN THE MENU WILL BE

AUTOMATICALLY ADJUSTED.

ARE YOU SURE ?

YES

CHANGE:JOG SET:SHUTTLE

4 Turn the shuttle dial clockwise.

“REC RATE” for “PRE-ALARM RECORDING” flashes.

<ALARM REC MODE		SET>
ALARM RECORDING	: ENABLED
PICTURE QUALITY	: ENHANCED
AUDIO RECORDING	: ON
ALARM INTERLEAVE	: ONLY
REC RATE: A 12.5FPS,		DURATION: 20SEC
PRE-ALARM RECORDING	: ON
REC RATE: A 12.5FPS,		DURATION: 1MIN
=> (00229 ALARMS CAN BE RECORDED)
ALARM TRIGGER	: ALARM
MOTION SENSOR		->

5 Turn the jog dial to set “REC RATE” (25 FPS, for example), and then turn the shuttle dial clockwise.

(Default setting: 12.5 FPS)

“DURATION” for “PRE-ALARM RECORDING” flashes.

<ALARM REC MODE		SET>
ALARM RECORDING	: ENABLED
PICTURE QUALITY	: ENHANCED
AUDIO RECORDING	: ON
ALARM INTERLEAVE	: ONLY
REC RATE: A 12.5FPS,		DURATION: 20SEC
PRE-ALARM RECORDING	: ON
REC RATE: A 25FPS,		DURATION: 1MIN
=> (00229 ALARMS CAN BE RECORDED)
ALARM TRIGGER	: ALARM
MOTION SENSOR		->

6 Turn the jog dial to set “DURATION” (10 SEC for example), and then turn the shuttle dial clockwise.

(Default setting: 1 MIN)

The cursor moves to “ALARM TRIGGER”.

<ALARM REC MODE		SET>
ALARM RECORDING	: ENABLED
PICTURE QUALITY	: ENHANCED
AUDIO RECORDING	: ON
ALARM INTERLEAVE	: ONLY
REC RATE: A 12.5FPS,		DURATION: 20SEC
PRE-ALARM RECORDING	: ON
REC RATE: A 25FPS,		DURATION: 10SEC
=> (00694 ALARMS CAN BE RECORDED)
ALARM TRIGGER	: ALARM
MOTION SENSOR		->

When pre-alarm recording settings have been completed

7 Press the [EXIT/OSD] button.

EXIT/OSD

The setting procedure is ended and the display returns to the normal screen.

“PRE” appears in the operation display area. When an alarm occurs, “ALARM” is displayed.

Number of alarm

PRE display

01-01-04 00:00:00 REC REPEAT EN A PRE 0000

02

zPre-alarm recording is carried out over the period before alarm input as set by “DURATION”. In order to playback pre-alarm recordings, carry out alarm search (using the [SEARCH] button). (JP.31)

As playback begins at the point of alarm occurrence, use the shuttle dial to move back into the area of pre- alarm recording.

zWhen normal recording and pre-alarm recording are performed simultaneously, audio will not be recorded together with pre-alarm video.

SETTINGS

80 English