Dymo M3, M5 manual Setting Up the Scale, Inserting the Batteries, Turning On the Power

Page 3

DYMO® Digital Postal Scale

This User Guide provides instructions for using your DYMO® Digital Postal Scale. Visit www.dymo.com/register to register your scale.

Setting Up the Scale

The scale is powered by three AAA batteries (included).

To set up the scale

1.Unpack the scale.

2.Set the scale on a firm, flat surface.

Power

0.0 TARE

kg

lb

HOLD

Tare/

Zero

LCD

display Kg/Lb Hold

Inserting the Batteries

The scale uses three AAA alkaline batteries. The scale automatically turns off after three minutes of inactivity.

To insert the battery

1.Turn the scale over.

2.Remove the battery compartment cover.

3.Insert three AAA batteries as shown.

!Make sure to insert the batteries correctly. Inserting the batteries backwards can damage the scale.

4.Replace battery compartment cover.

!Remove the batteries if the scale will not be used for a long period of time.

Turning On the Power

AAA AAA AAA

The scale has an Auto Shut Off feature which automatically turns off the scale after three minutes of inactivity.

To turn the scale on

Press on the front of the scale.

When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing items. The display shows 0 g, 0.0 oz, or 0.00 oz when ready.

To turn the scale off

Press on the front of the scale to turn the scale off.

The scale turns off automatically after three minutes of inactivity.

1

Image 3
Contents Digital Postal Scale User Guide Page Setting Up the Scale Turning On the PowerInserting the Batteries Changing the Units of Measure Using the ScaleUsing the Tare Feature Using the Hold FeatureTechnical Specifications Caring for the ScaleModel Troubleshooting WarrantyProblem/Error Message Solution Declaration of Conformity Environmental InformationDocumentation Feedback Distributed by DYMO, Atlanta, GA W0055381 Sanford, L.P