JVC KS-BTA200 manual Bluetooth Phone Operations, Receiving a call, Type a, Type B/Type C/Type D

Bluetooth Phone Operations

•Before you use a Bluetooth device with your receiver, connect a Bluetooth device. See “Bluetooth Connection” on page 12.

•When the sound is stopped or interrupted during the use of a Bluetooth device, try the following remedies.

•Turn Off, then turn On the power to the receiver.

•(When sound is not yet restored,) Connect the device again. See “Connecting/Disconnecting the device“ on page 17.

•For details of the menu operations, refer to the instruction manual supplied with your receiver.

•Indications on the display (monitor) and button names vary among the receivers.

ex. SOURCE: SRC 7: 7 / BACK MENU: AV MENU, AV Menu

Bluetooth Phone: Bluetooth PHONE, BT-PHONE

New Device: New device, NEW DEVICE

Selecting a source

Before you operate the Bluetooth phone function, change the source to “Bluetooth Phone.”

Receiving a call

If you receive a call, “Receiving Call (and name, phone number if acquired)” appears on the display.

for Type A

Press and hold MENU to call up the Bluetooth menu or press PHONE on the remote controller.

for Type B/Type C/Type D

Press SOURCE repeatedly to select “Bluetooth Phone.”

Press one of the following buttons.

The source changes to Bluetooth Phone and you can receive the incoming call.

Type A

Any key (except /ATT, +/–, MAP, SRC and 0.)

Type B/Type C/Type D

Any key (except /ATT and VOL +/–.)

for the Touch Panel model

You can also press the message “Receiving Call” displayed on the touch panel to receive a call.

•When another call comes in while talking, see “Answering a waiting call” on page 23.

To end the call or reject an incoming call, press and hold one of the above buttons.

Note

You can set the receiver to receive or reject the incoming call automatically. See “Auto Answer” on page 31.

Connection/Bluetooth Phone 19