JVC KS-BTA200 manual Getting Started, Installation, Mounting the adapter unit

Page 8

Getting Started

ENGLISH

Installation

Warning

Avoid installing the adapter unit and the microphone unit in the following places.

–Where they would hinder your safety driving.

–Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.

–Where they would be subject to rain, water splashes or excessive humidity.

–Where they would be subject to dust.

–Where they would be positioned on an unstable place.

–Where they could damage the car’s fittings.

–Where radio wave interferes (EX.: trunk, etc.).

Mounting the adapter unit

Wipe clean the selected surface sufficiently, and affix the Velcro tape.

Interface adapter unit

Velcro tape (hard) (supplied)

Velcro tape (soft) (supplied)

•If the Velcro tape (hard) adheres to the car mat directly, you may install this unit without using the Velcro tape (soft).

•The serial number is printed on the label placed on the bottom of the unit. Do not cover up the label with the velcro tape.

6

Image 8

Contents KS-BTA200 0536 ΕλληνικήPolski CeskyMagyar Information For U.S.A Information for Users on Disposal of Old EquipmentThank you for purchasing a JVC product Best possible performance from the unitPrecautions IntroductionBluetooth profile FeaturesPairing and PIN Code HFP Hands-Free ProfileContents Mounting the adapter unit InstallationGetting Started Installing the microphone unit To adjust the microphone angleAttach the microphone to Microphone clipConnecting to the receiver Typical connectionChecking the type of your receiver Example type of the receiver Type aType a Type B Type CBluetooth Phone Bluetooth Audio Change the settings.Bluetooth Connection PairingTo connect from the other Bluetooth device For Type aWhile Bluetooth Phone or For Type BFor Type C For Type DDisplay the menu, then select Mode Search Select a device name you want to connect¢ Move the entry position. Volume +/- Control dial English Display the menu, then select To connect a device manuallyPress MODE, then select Delete Pair Connecting/Disconnecting the device Select Bluetooth Phone or Bluetooth Audio as the sourceYou can disconnect a Bluetooth device To disconnect a deviceBluetooth Phone Operations Receiving a callType a Type B/Type C/Type DFor Type a For Type C For Type B For Type DPress ENT Press the number button Press ∞Calling by voice command Press and hold ModeAdvanced Operations Press and hold MenuNumber, then press ENT For Type a For Type BDisplay the dial menu Select a call history On the remote controller only Press and hold PhonePress Phone Last called phone number is displayedUsing preset numbers To store a preset numberTo call a preset phone number For Type C/Type D¢/5/∞ Select a number ENT Enter a number Calling by entering a phone numberDisplay the dial menu Select Phone Number Press 4/¢, Volume +/- to enter a phone number, then press ∞ Display the dial menu Select NumberReceiving an SMS Short Message Service Reading an SMS/ Text MessageTo read the message later only for type A/B/C Press 1 to read the messageSelect Bluetooth Message Menu Select a message history Not Available for this typeBluetooth Audio Operations Start playbackForward skip Reverse skipDisplay the menu, then select Bluetooth Settings Other SettingsBasic procedure Setting items Troubleshooting Symptoms RemediesSpecifications EN, GE, FR, NL, SP, IT, PR, GR, TH Caratteri disponibili per gli SMS e i messaggi di solo testo