Panasonic WJ-MPU955 manual Setting Main CPU IPA, Main a IP address setup window will appear

Panasonic MECA TDC INSTALL

Setting Main CPU IPA

The IP address of the main CPU(s) must be set before any transfer or adjustments can be made to the NSS. Follow the steps below in order to make such adjustments. Ask your installer or network administrator for the IPA of the Main A and Main B CPUs.

1.Open the MPU955 Time Management Utility.

Configure the CPU IP addresses.

For first time operation, the Main CPU IP address will not be set. The administrator must enter the correct IPA for the system CPU(s).

2.Make sure Main A is displayed in the drop-down list.

3.Click the “IPA Setup” button in the toolbar.

•Tip: Double-click on the IP address displayed to open the IPA setup window as a shortcut.

The Main A IP address setup window will appear.

4.Enter the correct IP address.

5.Click the green check mark to save, the red X to cancel.

FOR REDUNDANT CPU

6.Choose Main B from the drop-down list.

7.Click the “IPA Setup” button in the toolbar.

8.Repeat steps 4 and 5 for Main B CPU.

INSTALL MPU955 Time Management Utility 15