Transfer Settings

After the desired adjustments have been made to the TMU settings, it is necessary to transfer the settings to the system CPU(s).

1.Verify the settings displayed on the screen are correct.

2.Make sure that Main A (or Main B) is displayed in the drop-down list.

3.Click the “PUT CPU Info” button in the toolbar.

4.Check or uncheck the “Update Both CPUs” box.

If your system includes two Main CPUs, it is recommended that this box be checked, to ensure that the CPUs are set to the same time. The CPUs may be set separately, if desired, by repeating this procedure for each CPU.

If your system includes only one Main CPU, it is not necessary to check this box.

5.Click the “Send”.

Verify the message in the bottom status bar reads “CPU Update Successful!” If this message does not appear, or an error message occurs, the transfer did not take place. Contact your service personnel.

6.Click the “Get CPU Info” button to verify the settings.