Panasonic DMC-TZ2 Preparations 3 Setting the clock and language, While this message is displayed

Preparations 3 Setting the clock and language

Set mode dial (P.13) to NORMAL PICTURE mode before turning on power. ‘PLEASE SET THE CLOCK’ will be displayed when power is turned on for the first time.

While this message is displayed

Press

Adjust year, month, date, time

Select

Adjust

Power Set

CLOCK SET

0 : 00 JAN . 1 . 2007

MDY

CANCEL SELECT SET EXIT

Select to change date format

Press

Turn on power again and check time display.

Note

Failure to set the clock will mean correct date will not be printed (P.76) when printing pictures in digital photo center or when using DATE STAMP (P.66).

Time is displayed in 24-hour format. Year can be set between 2000 and 2099.

Clock settings will be saved for approx. 3 months even after battery is removed, provided a fully-charged battery was installed in camera for the 24 hours beforehand.

To change time setting

Select ‘CLOCK SET’ from SETUP menu (P.18), perform and above, and press .

To set local time at overseas destination

‘WORLD TIME’ (P.49)

To set language

Select LANGUAGE (P.22) from SETUP menu (P.20), and set to language displayed on the monitor.

Example of SETUP menu setting (P.18)

16 VQT1B61