Panasonic DMC-TZ2 Scene, Taking pictures according to, Set to ‘SCN1’ or ‘SCN2’, Select scene

Applications	Taking pictures according to the
(Record)	7 scene
	Set to ‘SCN1’ or ‘SCN2’
	The same selection of 20 scenes is
	available for each.

Select scene

	SCENE MODE 1 1/2
DISPLAY		PORTRAIT
	SELECT	DISPLAY SET

SCENE MENU

MENU/SET

Page 1 of

2currently displayed

To see description of each scene:

Select scene, and press ‘DISPLAY’.

SCN1 and SCN2

When using SCENE MODE, the camera remembers the previously selected scene. For example, if SCN1 is set to ‘NIGHT SCENERY’ and SCN2 is set to ‘NIGHT PORTRAIT’, you can easily switch between settings depending on whether or not there will be people in the picture.

To enable pictures to be taken immediately (no automatic SCENE MENU display)

Display SETUP menu (P.18)

Select ‘SCENE MENU’ (P.22) and set it to ‘OFF’. To display scene menu: Press ‘MENU/SET’

Note

Selecting a scene mode inappropriate for the actual scene may affect the coloring of your picture.

Brightness may be adjusted using ‘EXPOSURE’ (P.38) (except in ‘STARRY SKY’ mode). Detailed settings can be made in REC menu (P.50).

(Except in ‘SENSITIVITY’, ‘METERING MODE’, and ‘COL. MODE’) Certain settings cannot be made for some scenes.

‘W. BALANCE’ can be set to the following.

‘PORTRAIT’,‘SOFT SKIN’,‘SELF PORTRAIT’,‘SPORTS’,‘BABY’,‘PET’,‘HIGH SENS.’ (Setting is restored to ‘AWB’ when scene is changed.)

The types of flash available (P.36) vary according to the scene.

The scene mode flash setting is reset to the initial setting when the scene mode is changed.

Guidelines displayed in grey in ‘NIGHT PORTRAIT’, ‘NIGHT SCENERY’, ‘STARRY SKY’, and ‘FIREWORKS’ scene modes.

40 VQT1B61