Panasonic WV-CM1480, WV-CM1780 manual Preface, Features, Precautions

The Panasonic WV-CM2080, WV-CM1780 and WV-CM1480 Color Monitor’s high resolution S-video input assures high definition picture quality.

All monitor functions, except for power and input selection, can be controlled from an onscreen menu. Provided with power saving feature as well as standard BNC and S-video input connectors for connection to CCTV equipment.

The WV-CM2080, WV-CM1780 or WV-CM1480, and other devices compatible with Panasonic Security Data mode the

bear logo .

•Approx. 508 mm (20-inch) viewable area with a hori- zontal resolution of 500 TV lines (WV-CM2080)

•Approx. 406 mm (16-inch) viewable area with a hori- zontal resolution of 800 TV lines (WV-CM1780)

•Approx. 356 mm (14-inch) viewable area with a hori- zontal resolution of 750 TV lines (WV-CM1480)

•Three selectable inputs, including two composite and one S-video input

•Two standby modes for power saving: lower display brightness and blackout

•Maximum speaker output of 0.7 W

•The monitor can be controlled with the specified sys- tem controller using PS•Data (Panasonic Security Data) mode.

•Onscreen Setup menu

•Supplied with rack mounting brackets for mounting in a rack (WV-CM2080)

ENGLISH

•Refer all work related to the installation of this prod- uct to qualified service personnel or system installers.

•Do not block the ventilation opening or slots on the cover.

To prevent the appliance from overheating, place it at least 5 cm (2 inches) away from the wall.

•Do not drop metallic parts through slots.

This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service.

•Do not attempt to disassemble the appliance.

To prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Contact qualified service personnel for maintenance.

•Handle the appliance with care.

Do not strike or shake it, as this may damage the appli- ance.

•Do not expose the appliance to water or moisture, nor try to operate it in wet areas.

Take immediate action if the appliance becomes wet. Turn the power off and refer servicing to qualified ser- vice personnel. Moisture may damage the appliance and also cause electric shock.

•Do not use strong or abrasive detergents when cleaning the appliance body.

Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe off the remained part of the detergent in it with a dry cloth.

•Do not operate the appliance beyond its specified temperature, humidity or power source ratings.

Use the appliance at temperatures within –10°C - +50°C (14°F - 122°F) and a humidity below 90 %.

The input power source for this appliance is 120 V AC 60 Hz.