OPERATING PROCEDURES (with the System Controller)
For the following procedure, the
The
Given below is an example. For further details refer to the Operating Instructions supplied with the System Controller.
OPERATE | LOGIN | ALARM | MONITOR | CAMERA | BUSY | PROHIBITED |
|
UNIT |
| ||||||
|
|
|
|
|
| System Controller | |
|
| PROGRAM |
|
|
|
|
|
| SETUP | CAM SETUP |
|
|
| IRIS |
|
|
|
|
|
|
| CLOSE | OPEN |
SHIFT | FUNCTION | CAM FUNCTION |
|
|
| IRIS RESET | UP |
|
|
|
|
|
| ||
ALM RESET | ALM SUSPEND | AUTO |
|
| UNIT A | FOCUS |
|
|
| NEAR | FAR |
ALM RECALL | B/W | UNIT | AUTO FOCUS |
VCR CAM | MULTI SCREEN SELECT | DEF |
|
|
| L | R |
|
|
|
|
|
| ||
|
|
|
|
| UNIT B | ZOOM |
|
|
| AUX 2 |
|
| WIDE | TELE |
|
STILL | WIPER |
|
|
| |||
|
|
|
|
| |||
|
|
|
|
|
|
| DOWN |
– | + | AUX 1 |
|
|
|
|
|
SEQ PAUSE | SEQUENCE | PATROL PLAY | MON | CAM | HOME/PRESET |
|
|
SLOW | PATROL | PATROL | ESC LOGOUT | SET | PROGRAM |
|
|
| STOP | LEARN |
|
| PRESET |
|
|
1.Select a Unit Address number by pressing the Numeric buttons, then press the UNIT button.
2.To select the input to be displayed, select a specified CAM NO. (input number assigned) by pressing the Numeric but- tons, then press the CAM/SET button.
3.To open the Display Setting menu, press the SETUP/FUNCTION button for two seconds or more.
4.Move the cursor to the item parameter by moving the joystick up or down, then select the item parameter by moving the joystick to the right or left.
5.Pressing the CAM/SET button will switch to the level indicator display, then pressing the MON/ESC button will return to the menu display.
6.To close the menu, press the SETUP/FUNCTION button for two seconds or more
7.To activate the assigned function, select an assigned number by pressing the Numeric button, then press the SETUP/ FUNCTION button after pressing the SHIFT button.
Note: For function numbers refer to the Appendix on page 16.
14