Panasonic DP-2500 manual Installation, FCC Warning For U.S.A

Page 9

Precautions

Installation

The copier should not be installed in areas with the following conditions:

CExtremely high or low temperature and humidity.

Ambient conditions

Temperature: 50° F – 95° F (10° C – 35° C)

Relative humidity: 45% – 85%

CWhere temperature and humidity can change rapidly, causing condensation.

CDirect exposure to sunlight.

CDirectly in the air conditioning flow.

CIn areas of high dust concentration.

CIn areas of poor ventilation.

CIn areas with chemical fume concentration.

CIn areas with extreme vibration.

CWith unstable or uneven conditions (floors, etc.).

The maximum power consumption is 1.4 kW.

A properly wired (grounded), dedicated, 12A, 120V AC outlet is required. Do not use an extension cord.

The main plug on this equipment must be used to disconnect the main power. Please ensure that the socket outlet is installed near the equipment and is easily accessible.

FCC WARNING For U.S.A.

FCC WARNING:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

The user could lose the authority to operate this equipment if any unauthorized changes or modifications are made to this equipment.

Before Starting

9

Image 9
Contents English DP-2500/3000Common Features and Usage Operation ChartFunction Categories Touch Panel DisplayEnergy Star Table of Contents Problem Solving OptionsOthers Precautions For Your SafetyLaser Safety Toner and Paper Ventilation HandlingFCC Warning For U.S.A InstallationControl Panel Display StartingTouch Panel Display Indications Contents Refer toFull Size Copying Basic MenuCopying with Preset Ratios Reduction or Enlargement CopyingSelect the Copy $Adjust the side guides Using the Sheet BypassCopying on Special Paper, etc # Place approximately 50 sheets of paper into the traySided/Orig. H Copy Key Sided/Original H CopyProcedure \ 2/2 \ 1/2 \ 2 CopyTouch 1 \ Book \ 2 Copy On the Platen Mode and CopyPlace the Original Select Book \ FormatPlace Touch CopyOriginals Mode1 Copy Touch N in 1 ModeMake Selection 1 CopyTouch Booklet Booklet CopyMode Booklet CopySadf Single Sheet Automatic Document Feeder Function Sadf ModePlace the Original Select One at a Time Function Csadf function cannot be combined with 2 \ 1 and 2 \Zoom/Effects Key Zoom/EffectsZoom Copying ZoomSelect Zoom Feature NumberingNumbering Margin/Book/Edge Select EdgeMargin or Book Insertion/Overlay Key Insertion/OverlayOHP Interleaving Interleaving ModeOHP Interleaving Blank Paper Copied PaperOverlay Overlay ModeOverlay 1st-pageOverlay Job Memory To store a job in memoryTo recall a job stored in memory Energy Saver Mode Other FeaturesSleep Mode Interrupt ModeSetting the Digital Skyshot Mode Manual Skyshot Mode/Digital Skyshot Mode# Touch the Copier Settings key Touch the 06 Digital Skyshot keyChanging the default M1/M2 size See Setting the Manual Skyshot Mode# Select the Copier Settings in Function Setting mode Touch the 09 KEY Operator Mode keyCombined Function Table Function Key Reset Key Using Function Modes to Change the Initial Copy ModesFunction OptionsGeneral Functions Modes Function Initial SettingScreen Modes Function Initial Setting Copier SettingsGeneral Functions for Key Operator Input the Key Operator ID Code to Change SettingsORIG. SET Beep Copier Settings for Key Operator 10 MAX. Copy Setting Changing the Auto Exposure Setting Function Setting#Touch Copier Settings Proceed as FollowsSelect 09 KEY Operator Mode key Function Setting for Key OperatorChanging the Paper Size #Touch General FunctionsPaper Guide a Stopper Guide b KEY Operator Mode key Departmental Counter# Select General Functions Exit function mode Change the Department Counter Number, ID Code and limitMaximum Number of Copies Components AccessoriesAutomatic Document Feeder FeaturesADF DA-AS200/i-ADF DA-AR250 ComponentsOperation PlaceOriginal Finisher/Exit Guide Unit Finisher ModeDA-FS200 Finisher Platen Face-UpPull out the tape Reinstall the Staple Cartridge #Open the Staple Cover Problem Solving Adding Paper JSheet Paper Tray Open the Front Cover Replacing the Toner Cartridge and Waste Toner Box ?Slowly pull the Waste Toner Box Straight outInstall a new Waste Toner Box Install the new Toner CartridgeShake the new Toner Cartridge WellPaper Misfeed Locations Finisher Removing a Misfed PaperCopier Paper Feed UnitFinisher Push the latch to open the cover Paper Transport AreaRemove the misfed paper Close the cover by pushingOpen the Right Cover Paper Entry AreaClose the Right Cover Automatic Duplex Unit ADUSystem Console ADF/i-ADF #Lift up the ADF Input Tray Before Calling Service TroubleshootingCheck ActionLight Copies As a rule, clean weeklyMarked Copies Platen CoverReplacing the Battery DP-2500/3000 Copier SpecificationsBin Finisher DA-FS200 ADF DA-AS200, i-ADF DA-AR2503rd/4th Paper Feed Module DA-DS200/205/210/215 DA-AS200 DA-AR250Part Name Remarks Options and SuppliesFor Printer For FaxWarranty
Related manuals
Manual 187 pages 29.21 Kb

DP-2500 specifications

The Panasonic DP-2500 is a multifunctional digital imaging solution designed to meet the demands of modern office environments. This robust copier stands out for its combination of efficiency, reliability, and advanced technology, making it an ideal choice for businesses looking to enhance their productivity and streamline their document management processes.

One of the standout features of the DP-2500 is its impressive printing and copying speed. With a rapid output of up to 25 pages per minute, it ensures that high-volume printing tasks are completed quickly and efficiently. Additionally, the device supports a variety of paper sizes, accommodating everything from standard letter-sized documents to larger formats, ensuring versatility for different office needs.

The DP-2500 utilizes advanced image processing technologies to deliver high-quality prints with exceptional clarity and sharpness. With a maximum resolution of 600 x 600 dpi, businesses can expect crisp text and vibrant images, making it suitable for both professional reports and marketing materials.

Another key characteristic of the DP-2500 is its user-friendly interface. The device features a large touchscreen display that simplifies operation and navigation. Users can easily access various functions, including copying, printing, and scanning, while also customizing settings to suit their specific requirements. This intuitive design minimizes training time and allows users to focus on their core tasks.

In terms of connectivity, the DP-2500 is equipped with a range of options, including USB, Ethernet, and wireless capabilities. This flexibility allows users to connect seamlessly to various devices, facilitating efficient document sharing and collaboration within the office. Additionally, the machine supports mobile printing, enabling users to print directly from their smartphones or tablets.

The DP-2500 also prioritizes energy efficiency and environmental sustainability. It uses Panasonic's cutting-edge energy-saving technologies, which not only reduce power consumption but also support eco-friendly practices in the workplace. The copier is designed to operate quietly, adding to a conducive work environment.

Moreover, the device incorporates advanced security features to protect sensitive business information. With options for user authentication and document encryption, businesses can ensure that their data remains secure.

In summary, the Panasonic DP-2500 is a reliable and efficient multifunctional copier that caters to the varied needs of contemporary businesses. Its high-speed output, superior image quality, user-friendly interface, and robust connectivity options make it an essential tool for enhancing productivity and ensuring seamless document management. With a commitment to energy efficiency and security, the DP-2500 remains a top choice for organizations seeking to optimize their office workflows.