Panasonic DP-2500 manual Other Features, Energy Saver/Interrupt, Energy Saver Mode, Sleep Mode

Other Features

Energy Saver/Interrupt

ENERGY SAVER Key INTERRUPT Key

			ENERGY SAVER	INTERRUPT	FUNCTION	RESET
			DP-3000
			ORIGINAL	COPY					CLEAR
	MULTI-SIZE				REDIAL /
SORT		COPY	SIZE	SIZE	PAUSE
	FEED		LEDGER				ABC	DEF
						1	2	3
			ADD TONER		FLASH/
		FAX			SUB-ADDR				STOP
			LEGAL			GHI	JKL	MNO
LCD			ON LINE		LINE	4	5	6
CONTRAST
					SELECT
		INTERNET	LETTER			PQRS	TUV	WXYZ
					MONITOR	7	8	9

PRINTER

LETTER START

ON LINE	SET	0
DATA	INVOICE
	MON. VOL.	TONE

ALARM ACTIVE

ENERGY SAVER	■ These modes can save power while the copier is
	not in use.

Energy Saver Mode

#To enter this mode

Press the ENERGY SAVER key or the copier will automatically enter the Energy Saver Mode after 15 minutes from the last copy. The indicator will flash.

$To cancel this mode and make copies Press the ENERGY SAVER key again.

Sleep Mode*

#Automatically enters the Sleep Mode after 60 minutes from the last copy. The copier power will drop and the indicator will light.

	$To make copies, press the ENERGY SAVER key.
	Interrupt Mode
INTERRUPT	CThis mode can interrupt other copy jobs while
	making copies.
	#Touch the INTERRUPT key, the indicator will light.
	$Make another copy job using the platen glass.

%Touch the INTERRUPT key again to continue the original job.

Note: The ADF/iADF can not be used with interrupt. (Use only the Platen)

NOTE	CEnergy saver time (15 minutes) and Sleep time (60 minutes) can be changed by the
	key operator. (See page 39)
	Modes	Power Consumption	Warm Up Time
	Normal Operation	Approximately149 Wh	N/A
	Energy Saver Mode	Approximately 49 Wh	30 sec. recovery
	Sleep Mode	Approximately 1.8 Wh (DP-2500)	35 sec. recovery (DP-2500)
		Approximately 1.9 Wh (DP-3000)	45 sec. recovery (DP-3000)

∗Sleep Mode will not activate if the file for the Overlay mode has been stored in memory. (See page 30)

32