Mode Functions
■Energy Saver Mode/Auto Off Mode
Energy Saver Mode
#To enter this mode
Press Energy Saver key. The indicator will flash. Automatically activates after 15 minutes from the last copy.
$To cancel this mode
Press Energy Saver key again.
Auto Off Mode
#Automatically activates after 30 minutes from the last copy.
Power consumption will drop and the Energy Saver key indicator will light.
$To cancel this mode. Press Energy Saver key.
If you wish to change the above settings or if you need more information, call your Panasonic authorised dealer.
| Power Consumption | Warm Up Time | ||
Normal Operation | Approximately | 60 | Wh | None |
Energy Saver Mode | Approximately | 35 | W | 5 seconds |
Auto Off Mode | Approximately | 1.5 | W | 25 seconds |
|
|
|
|
|
■Toner Saver Mode
1)This only works when using copy mode. When printing out by Printer or Fax function, this mode does not work.
2)The Toner Saving Mode is to save toner consumption by copying dark originals lighter. The exposure indicator “LIGHT” flashes when Toner Saving Mode is on.
3) To enter this mode:
#Press Copy Key $Press Function Key
%Press “4” key of Keypad &Press Set Key.
(Select “TONER SAVER 2:VALID”. Press “2” key of Keypad
)Press Set Key.
To cancel this mode:
#Press Copy Key $Press Function Key
%Press “4” key of Keypad &Press Set Key
(Select “TONER SAVER 1:INVALID”. Press “1” key of Keypad
)Press Set Key.
■Copy Reservation Function
While the copier is warming up, you may position your original on the copier, enter your copy job selections and press the Start key. The Wait indicator (Start key) will flash until the warm up cycle is completed and the copy job will automatically start.
Note: Please enter your copy job, when “WARM UP, PLEASE WAIT SELECT COPY JOB” appears in message display.
12