Panasonic DP-150FP manual Handling Toner and Paper Installation, Precautions

Page 7

Handling

Toner and Paper

Installation

Precautions

■Do not look directly at exposure lamp when copying.

■Do not turn the power switch off or open the front panel during copying. (See page 9)

CDo not drop paper clips or other metal objects into the copier.

■Store toner, developer and paper in cool areas with low humidity.

CHigh quality paper of 60 – 90 g/m2 (55 – 130 g/m2 via sheet bypass) may be used.

CFor optimum copy quality, it is essential that Panasonic Brand Toner is used in the copier.

■The copier should not be installed in areas with the following conditions:

CExtremely high or low temperature and humidity. Ambient Conditions Temperature: 10°C – 30°C Relative humidity: 30% – 80%

CWhere temperature and humidity can change rapidly, causing condensation.

CDirect exposure to sunlight.

CDirectly in air conditioning flow.

CIn areas of high dust concentration.

CIn areas of poor ventilation.

CIn areas with chemical fume concentration.

CIn areas with extreme vibration.

CUnstable or uneven floors.

Precautions

7

Image 7

Contents English DP-150FPWhen manually selecting exposure control Operation ChartCommon features How to copy without using ADF Automatic Document FeederUseful for office, more than 4 functions OverviewDP-150FP Operating Instructions Manual Overview Energy Star Table of Contents For your safety PrecautionsLaser Safety Precautions Handling Toner and Paper InstallationFor U.K VentilationInternal Using the Sheet BypassComponents ExternalControl Panel Set Key Message DisplayKeypad Start Key Clear/Stop Key Copy Reservation Function Mode FunctionsEnergy Saver Mode/Auto Off Mode Toner Saver ModeFeatures List FeaturesSelect the copy ratio/size Common featuresThere are 3 preset reduction and 1 preset enlargement modes Reduction or Enlargement CopyingZoom ratio can be selected from 50% to 200% in 1% increments Zoom CopyingKey Start Creative FeaturesDigital skyshot ModeFor 2 in 1 copying 1 CopyStart SortingMultiple copies to be sorted automatically Sorting isOpen the Sheet Bypass $ Adjust the side guides to paper WidthPosition original Select copy ratio/sizeOption Adding Paper HandlingUse the following steps to add paper Paper Guide a Stopper Paper Guide b Changing paper sizeChanging Toner Cartridge Changing Drum Unit $Push the button Removing a Paper Misfeed Main UnitPaper transport and paper entry areas #Open the Sheet Bypass#Close the front panel Paper exit area#Turn the knob $Remove the misfed paperADF Automatic Document Feeder area Removing an Original Misfeed ADFPaper Feed Cover 2nd Paper Feed Module area Removing a Misfed Paper 2nd Paper Feed ModuleRight Cover Button Sheet Bypass Action TroubleshootingChecking CheckAs a rule, clean monthly As a rule, clean once a week$Push the button #Slide corona cleaner green$Put the corona cleaner to Reinstall the drum unitADF Automatic Document Feeder SpecificationsCopier Functions Main unitConsumables List Consumables ListImportant Information