Panasonic DP-1810F Contents Refer to Interrupt Key, Memory in Key, M1/M2 Keys, Copy Size Key

-./ 01 Control Panel

LCD Display

654

Warning Indicators
	J Add Paper
	? Add Toner
	I Misfeed				;	=		32
	2 Call Service
		No					Contents		Refer to
			INTERRUPT Key, MEMORY IN Key, M1/M2 Keys
		4	CInterrupt Key interrupts other copy or print jobs while making copies.						Pages 21, 23
			CMemory In Key registers two copy jobs for recall at a later time.
			CM1/M2 Keys are used to store a Job in Memory or to recall a Job stored in Memory.
		5	Cursor Keys CSelect copy ratio and function modes using (G or F).						——
		6	PAPER TRAY Key CUsed to select the paper tray manually.						——
		7	COPY SIZE Key						——
			CUsed to select Reduction/Enlargement only. For additional details, see page 13.
		8	ORIGINAL SIZE Key						——
			CUsed to select the original size manually. For additional details, see page 13.
		9	PRINT Key CWhen selecting the Printer ON/OFF Line.						——
		:	COPY Key CPress when using the unit as a photocopier.						——
		;	Alarm LED (Red)	CLights when trouble occurs.*					——
		=	Active LED (Green)	CLights when machine is active.					——

NOTE	CThe Control Panel displayed above shows only copier functions. Please refer
	to the appropriate operating instructions for the control panel functions or in
	the Panasonic Doccument Management System CD-ROM for the Printer
	control panel functions.

∗When the machine detects a problem or an alarm status is activated, the ;

Alarm LED lights up or begins to flash.

LED Lights: Machine detected a trouble status

CNo paper in the selected tray or toner has run out.

CMachine detected trouble, such as paper misfeed or jam.

LED Flashes: Machine detected an alarm status

CNo paper in the tray. (Tray not selected)

CRunning low on toner, etc.

11

Before Starting